Elise Masur - Theatre

La Bohème

Production Photos

Deck 1

Deck was constructed of 3/4” OSB on 2x4 framing.

Deck 2

Deck consisted of 13 separate platforms.

Planks (Henry Echevaria)

3/4” plywood was ripped to 6” planks. These planks overhung the stage left edges of each platform to create a “lip and ledger” system. (Photo by Henry Echevaria)

Planks 2 (Henry Echevaria)

The 6” wide planks also created a “lip and ledger” system in the upstage/downstage orientation. (Photo by Henry Echevaria)

Assembled Deck (Henry Echevaria)

A top view of the fully assembled deck. It was removed and reinstalled 3 times throughout the production’s 1 and a half week run. (Photo by Henry Echeveria)

Wall Frames (Henry Echevaria)

Because the walls had to fly, their frames were built of 2x4. The foam facing was applied with Weldwood glue and 4” screws in fender washers. (Photo by Henry Echeveria)

Wall Frames - Close (Henry Echevaria)

Stringers

Stingers made of 3/16” aircraft cable attached the wall to a batten.

Wall

1/2

All images taken by Elise Masur unless otherwise stated